| Number of channels (#) | 1 |
| Total supply voltage (Max) (+5V=5, +/-5V=10) | 45 |
| Total supply voltage (Min) (+5V=5, +/-5V=10) | 1.3 |
| Rail-to-rail | In to V-, Out |
| GBW (Typ) (MHz) | 0.05 |
| Slew rate (Typ) (V/us) | 0.2 |
| Vos (offset voltage @ 25 C) (Max) (mV) | 2 |
| Iq per channel (Typ) (mA) | 0.27 |
| Vn at 1 kHz (Typ) (nV/rtHz) | 50 |
| Rating | Military |
| Operating temperature range (C) | -55 to 125 |
| Offset drift (Typ) (uV/C) | 2 |
| Input bias current (Max) (pA) | 20000 |
| CMRR (Typ) (dB) | 102 |
| Output current (Typ) (mA) | 20 |
| Architecture | Bipolar |
- Input Offset Voltage:? 2.0 mV (max)
- Input Offset Current:?0.7 nA (max)
- Input Bias Current:?20 nA (max)
- Reference Regulation:?0.1% (max)
- Offset Voltage Drift:?2μV/°C
- Reference Drift:??0.002%/°C
All trademarks are the property of their respective owners.
The LM10 is a monolithic linear IC consisting of a precision reference, an adjustable reference buffer and an independent, high quality op amp.
The unit can operate from a total supply voltage as low as 1.1V or as high as 40V, drawing only 270μA. A complementary output stage swings within 15 mV of the supply terminals or will deliver ±20 mA output current with ±0.4V saturation. Reference output can be as low as 200 mV.
The circuit is recommended for portable equipment and is completely specified for operation from a single power cell. In contrast, high output-drive capability, both voltage and current, along with thermal overload protection, suggest it in demanding general-purpose applications.
The device is capable of operating in a floating mode, independent of fixed supplies. It can function as a remote comparator, signal conditioner, SCR controller or transmitter for analog signals, delivering the processed signal on the same line used to supply power. It is also suited for operation in a wide range of voltage- and current-regulator applications, from low voltages to several hundred volts, providing greater precision than existing ICs.
