--- 產品詳情 ---
| Number of ADC channels | 2 |
| Number of DAC channels (#) | 2 |
| Digital audio interface | R, L |
| Analog inputs | 2 |
| Sampling rate (Max) (kHz) | 48 |
| Rating | Catalog |
| ADC SNR (Typ) (dB) | 88 |
| DAC SNR (Typ) (dB) | 92 |
| | |
- 16-Bit Delta-Sigma ADC and DAC
- Stereo ADC:
- Single-Ended Voltage Input
- Anti-Aliasing Filter Included
- High Performance
- THD+N: -84 dB
- SNR: 88 dB
- Dynamic Range: 88 dB
- 1/64× Decimation Digital Filter
- Passband Ripple: ±0.05 dB
- Stopband Attenuation: -65 dB
- Digital HPF Included
- Stereo DAC:
- Single-Ended Voltage Output
- Analog LPF and FIR Filter Included
- High Performance
- THD+N: -88 dB
- SNR: 92 dB
- Dynamic Range: 92 dB
- 8× Oversampling Digital Filter
- Passband Ripple: ±0.1 dB
- Stopband Attenuation: -43 dB
- Audio Data Format:
- ADC: 16-bit, Left-Justified
- DAC: 16-bit, Right-Justified
- Special Built-In Functions:
- Digital De-Emphasis: 32, 44.1, 48 kHz
- ADC/DAC Independent Power Down With Pop-Noise Free Muting
- Sampling Rate: 8 kHz to 48 kHz
- System Clock: 256fS, 384fS, 512fS
- Low Voltage Power Supply:
- 2.4 V TYP, 2.1 V MIN to 3.6 V MAX
- Low Power Dissipation:
- 32 mW at VCC = 2.4 V
- Package: 16-Pin TSSOP
- APPLICATIONS
- Digital Video Camera
- Portable MD Player
- Other Portable System
The PCM3008 is a low cost single chip 16-bit stereo audio codec with single-ended analog voltage input and output.
Both ADCs and DACs employ delta-sigma modulation with 64-times oversampling. ADCs include a digital decimation filter and digital high pass filter. DACs include an 8-times oversampling digital interpolation filter, digital de-emphasis filter and pop-noise free muting which works during the power down ON/OFF sequence. The PCM3008 accepts left-justified format for ADC, and right-justified format for DAC. Independent power-down modes for ADC and DAC are provided.
The PCM3008 is suitable for a wide variety of cost-sensitive consumer applications where good performance is required. It is fabricated using a highly advanced CMOS process and is available in a small 16-pin TSSOP package.
為你推薦
-
TI數字多路復用器和編碼器SN54HC1512022-12-23 15:12
-
TI數字多路復用器和編碼器SN54LS1532022-12-23 15:12
-
TI數字多路復用器和編碼器CD54HC1472022-12-23 15:12
-
TI數字多路復用器和編碼器CY74FCT2257T2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS258A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74AHCT1582022-12-23 15:12
-
【PCB設計必備】31條布線技巧2023-08-03 08:09
相信大家在做PCB設計時,都會發現布線這個環節必不可少,而且布線的合理性,也決定了PCB的美觀度和其生產成本的高低,同時還能體現出電路性能和散熱性能的好壞,以及是否可以讓器件的性能達到最優等。在上篇內容中,小編主要分享了PCB線寬線距的一些設計規則,那么本篇內容,將針對PCB的布線方式,做個全面的總結給到大家,希望能夠?qū)︷B(yǎng)成良好的設計習慣有所幫助。1走線長度2353瀏覽量 -
電動汽車直流快充方案設計【含參考設計】2023-08-03 08:08
-
Buck電路的原理及器件選型指南2023-07-31 22:28
-
100W USB PD 3.0電源2023-07-31 22:27
-
千萬不要忽略PCB設計中線寬線距的重要性2023-07-31 22:27
想要做好PCB設計,除了整體的布線布局外,線寬線距的規則也非常重要,因為線寬線距決定著電路板的性能和穩定性。所以本篇以RK3588為例,詳細為大家介紹一下PCB線寬線距的通用設計規則。要注意的是,布線之前須把軟件默認設置選項設置好,并打開DRC檢測開關。布線建議打開5mil格點,等長時可根據情況設置1mil格點。PCB布線線寬01布線首先應滿足工廠加工能力,2491瀏覽量 -
基于STM32的300W無刷直流電機驅動方案2023-07-06 10:02
如何驅動無刷電機?近些年,由于無刷直流電機大規模的研發和技術的逐漸成熟,已逐步成為工業用電機的發展主流。圍繞降低生產成本和提高運行效率,各大廠商也提供不同型號的電機以滿足不同驅動系統的需求?,F(xiàn)階段已經在紡織、冶金、印刷、自動化生產流水線、數控機床等工業生產方面應用。無刷直流電機的優點與局限性優點:高輸出功率、小尺寸和重量、散熱性好、效率高、運行速度范圍寬、低 -
上新啦!開發板僅需9.9元!2023-06-21 17:43
-
參考設計 | 2KW AC/DC數字電源方案2023-06-21 17:43
-
千萬不能小瞧的PCB半孔板2023-06-21 17:34