眾所周知，GaN 功率器件具有傳統功率器件無可比擬的性能優勢，如大幅提升的開關速度和顯著降低的開關損耗，從而提供更優的整體效率，這使得GaN器件在高頻、高效率的應用中展現出明顯優勢。我們的應用指導將幫助客戶更好得使用云鎵的 GaN 器件，更大限度去挖掘云鎵的 GaN 器件的能力。本次發布云鎵應用手冊第三彈: GaN switching behavior analysis。此外，客戶可以通過云鎵半導體官方網站或者微信公眾號了解到更多云鎵 GaN 產品資訊和相關技術文檔。

Part 1 : Overview ofDPT

01

Why do we need DPT to measure GaN?

Whydo we need double pulse tester to measure GaN FETs?

Extracting switching parameters (ton, toff, tr, tf)

Extractingswitching loss (Eon, Eoff)

Emulatingsystem behavior, e.g. turn-off drain spike, switching time and etc.

Evaluating dynamic performance, e.g. dynamic Ron, D-HTOL, switching SOA, and etc.

Noneed of high-power equipment, low-cost scheme

02

An example of DPT-650V/30mΩ CloudSemi GaN

Part 2 : Detailed analysis

01

1stpulse turn-on: zero-current switching

Stageof start-up,zero-currentturn-on (capacitive-load switching)：

• Vdsof rectifier GaN:Vbus→ 0; Vdsof synchronous GaN: 0 → Vbus
• Thesetup can be treated as a capacitive-load switching:
• Oscilloscope-captured Ids comes from charging Coss of Syn GaN: Ids = C(Vbus-Vds)*dv/dt
• DischargingCossof Rec GaN cannot be directlycaptured by oscilloscope: ICoss= Coss*dv/dt
• Current through Rec GaN channel: Ich, rec = Ids + Coss*dv/dt

02

HSW turn-on transient: Vgoff to Vth

t0~t1,gate drive charges Ciss of Rec GaN:

Vgsof Rec GaN rises to Vth. No current flowsthrough RecGaN.

Loadcurrent flows through inductor and Syn GaN.

UntilVgsof Rec GaN reach to its Vth, loadcurrent starts to commutate and flow through it.

03

HSW turn-on transient: current commutation

t1~t2,current commutation:

AsVgsof Rec GaN reaches Vth,current starts to flow through Rec GaN. Load current gradually commutates fromSyn GaN to Rec GaN, as Vgsincreases;

Duringcurrent commutation, the gate driver charges Ciss until Rec GaN has currentcapability of IL.[Ids|(Vgs=Vgp) = IL]

WhenVgs= Vgp (Miller plateau, = Vth + IL/gm),all the inductive-load current flows through the Rec GaN.

Inthis duration, Rec GaN Idsoverlaps with Vds, andI-Voverlap lossdominates and can be calculated by integrating I&V.

04

HSW turn-on transient: voltage commutation

t2~t3,voltage commutation:

AsVgsof Rec GaN reaches Vgp, allthe load current flows through Rec GaN;

Then,RecGaN Cossstarts to discharge from Vbusto Von& SynGaN Cossstarts to charge to Vbus

RecGaN Cossdischarging cannot be captured,but SynGaN Cosscharging can be recognized from Ids waveform

Duringthis duration, the loss on Rec GaN consists of 2main parts:

I-V overlap loss

Cap loss fromSyn/Rec GaN: Vbus*Qoss

GaN features much lower Qossandswitching loss Psw comparing to Si SJ

05

HSW turn-on transient: gate over-drive

t3~t4,gate over-drive to make GaN fully turn-on:

Gatedriver continue to charge Ciss fromVgp to Vdrive (e.g. 6V), making GaN FET fullyturn-on

Von= IL* Rdson (Vgs= Vdrive). Therecommended gate drive voltage for CloudSemi E-mode GaNis ~6.0V.

Aftert4, inductive load will continue to excite, following dIL = Vbus/L * dt

Conductionloss on Rec GaN FET dominates in this duration

Comparing to Si SJ, GaN FET features much lower gate charge QG

06

Turn-on period: excitation

t4~t5,inductive load excitation:

dIL = Vbus/L *dt, Ids = IL

Cissstops charging

Currentflowingthrough GaN channel gradually increases

RecGaN FET works in linear region.

Conductionloss on Rec GaN FET dominates in this duration

07

HSW turn-off transient: VGS → Vgp

t5~t6, Ciss starts discharging:

Rec GaN Ciss starts to discharge, until GaN enters saturation mode (Vgs= Vgp, Idsat = IL).

Here,Vgp =Vth + IL/gm

RecGaN works from linear region to saturation region

Conductionloss on Rec GaN FET dominates in this duration

08

HSW turn-off transient: voltage commutation

t6~t7,voltage commutation (Rec GaN Vdsrises to Vbus):

Loadcurrent charges the switching node (charging CossofRec GaN, discharging Cossof Syn GaN)

Parameterof Qossis crucial, and determinescharging/discharging speed (i.e. switching speed)

Powerloss on Rec GaN mainly comes from I-V overlap loss

09

HSW turn-off transient: current commutation

t7~t8,current commutation:

Load current gradually commutates from Rec GaN to Syn GaN, as Vgsdecreases;

Duringcurrent commutation, the gate driver discharges Ciss until Rec GaN has been turned off(Vgs= Vth)

WhenRec GaN Vgs= Vth (i.e. after t8), all the inductive-load current flows through theSyn GaN.

Powerloss mainly comes from I-V overlap loss

Part 3 : Summary

01

Summary

更多關于 GaN 器件在系統中的損耗，我們將以 200V→400V 同步 boost 和 48V→12V同步 buck 來進行實例說明，敬請期待。