The SS360NT， SS360ST， SS360ST-10K， SS460S， SS460S-T2， and SS460S-LP High Sensitivity Latching Digital Hall-Effect Sensor ICs are small， sensitive and versatile devices that are operated by the magnetic field from a permanent magnet or an electromagnet. They are designed to respond to alternating North and South poles. The SS360NT is turned on by a North pole while the SS360ST， SS460S， SS460S-T2， and SS460S-LP are turned on by a South pole. These sensor ICs offer reliable switching points with a high magnetic sensitivity of 30 G typical （55 G maximum）。 They do not use chopper stabilization on the Hall element， providing a clean output signal and a faster latch response time when compared to competitive high sensitivity Hall-effect latching sensor ICs which do use chopper stabilization. These products offer reverse polarity protection， deliver a stable output over a -40 °C to 150 °C ［-40 °F to 302 °F］ temperature range， and can accept any dc supply voltage from 3 Vdc to 24 Vdc. For brushless dc motor manufacturers who need latching sensors with reliable， consistent performance for more efficient and smaller designs， Honeywell’s High Sensitivity Hall-Effect Latching Digital Sensor ICs respond to low magnetic fields and offer consistent repeatability while delivering faster response times to a change in magnetic field for better motor efficiency