Gerard J.M. Smit,
1 Andr ′ e B. J. Kokkeler,
1 Pascal T.Wolkotte,
1 Philip K. F. H¨ olzenspies,
1
Marcel D. van de Burgwal,
1 and PaulM. Heysters2
1
Faculty of Electrical Engineering, Mathematics and Computer Science, University of Twente, Drienerlolaan 5,
7522 NB Enschede, The Netherlands
2
Recore Systems, Capitool 22, 7521 PL Enschede, The Netherlands
Received 15 May 2006; Revised 20 December 2006; Accepted 20 December 2006
Recommended by Neil Bergmann
We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at
a single generic architecture that is capable of dealing with di?erent DSP applications. This architecture has to be energy e?cient
and fault tolerant.We introduce a heterogeneous tiled architecture and present the details of a domain-speci?c recon?gurable tile
processor called Montium. This recon?gurable processor has a small footprint (1.8mm2
in a 130 nm process), is power e?cient
and exploits the locality of reference principle. Recon?guring the device is very fast, for example, loading the coe?cients for a 200
tap FIR ?lter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC) via a
network interface (NI). Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types
of services: guaranteed throughput (GT) and best e?ort (BE). For both NoCs estimates of power consumption are presented. The
NI synchronizes data transfers, con?gures and starts/stops the tile processor. For dynamically mapping applications onto the tiled
architecture, we introduce a run-time mapping tool.
Copyright ? 2007 Gerard J. M. Smit et al. This is an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly
cited.