資料介紹
The MAX1183 is a 3V, dual 10-bit analog-to-digital converter
(ADC) featuring fully differential wideband trackand-
hold (T/H) inputs, driving two pipelined, nine-stage
ADCs. The MAX1183 is optimized for low-power, high
dynamic performance applications in imaging, instrumentation,
and digital communication applications. This ADC
operates from a single 2.7V to 3.6V supply, consuming
only 120mW while delivering a typical signal-to-noise ratio
(SNR) of 59.6dB at an input frequency of 20MHz and a
sampling rate of 40Msps. The T/H driven input stages
incorporate 400MHz (-3dB) input amplifiers. The converters
may also be operated with single-ended inputs. In
addition to low operating power, the MAX1183 features a
2.8mA sleep mode as well as a 1μA power-down mode to
conserve power during idle periods.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure allows the use of this internal or an externally
derived reference, if desired for applications requiring
increased accuracy or a different input voltage range.
The MAX1183 features parallel, CMOS-compatible
three-state outputs. The digital output format can be set
to two’s complement or straight offset binary through a
single control pin. The device provides for a separate
output power supply of 1.7V to 3.6V for flexible interfacing.
The MAX1183 is available in a 7mm ? 7mm, 48-pin
TQFP package, and is specified for the extended
industrial (-40°C to +85°C) temperature range.
Pin-compatible lower and higher speed versions of the
MAX1183 are also available. See Table 2 at end of data
sheet for a list of pin-compatible versions. Refer to the
MAX1180 data sheet for 105Msps, the MAX1181 data
sheet for 80Msps, the MAX1182 data sheet for 65Msps,
and the MAX1184 data sheet for 20Msps. In addition to
these speed grades, this family includes a multiplexed
output version, for which digital data is presented timeinterleaved
and on a single, parallel 10-bit output port.
Applications
High-Resolution Imaging
I/Q Channel Digitization
Multichannel IF Sampling
Instrumentation
Video Application
Ultrasound
(ADC) featuring fully differential wideband trackand-
hold (T/H) inputs, driving two pipelined, nine-stage
ADCs. The MAX1183 is optimized for low-power, high
dynamic performance applications in imaging, instrumentation,
and digital communication applications. This ADC
operates from a single 2.7V to 3.6V supply, consuming
only 120mW while delivering a typical signal-to-noise ratio
(SNR) of 59.6dB at an input frequency of 20MHz and a
sampling rate of 40Msps. The T/H driven input stages
incorporate 400MHz (-3dB) input amplifiers. The converters
may also be operated with single-ended inputs. In
addition to low operating power, the MAX1183 features a
2.8mA sleep mode as well as a 1μA power-down mode to
conserve power during idle periods.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure allows the use of this internal or an externally
derived reference, if desired for applications requiring
increased accuracy or a different input voltage range.
The MAX1183 features parallel, CMOS-compatible
three-state outputs. The digital output format can be set
to two’s complement or straight offset binary through a
single control pin. The device provides for a separate
output power supply of 1.7V to 3.6V for flexible interfacing.
The MAX1183 is available in a 7mm ? 7mm, 48-pin
TQFP package, and is specified for the extended
industrial (-40°C to +85°C) temperature range.
Pin-compatible lower and higher speed versions of the
MAX1183 are also available. See Table 2 at end of data
sheet for a list of pin-compatible versions. Refer to the
MAX1180 data sheet for 105Msps, the MAX1181 data
sheet for 80Msps, the MAX1182 data sheet for 65Msps,
and the MAX1184 data sheet for 20Msps. In addition to
these speed grades, this family includes a multiplexed
output version, for which digital data is presented timeinterleaved
and on a single, parallel 10-bit output port.
Applications
High-Resolution Imaging
I/Q Channel Digitization
Multichannel IF Sampling
Instrumentation
Video Application
Ultrasound
adc
加入交流群
掃碼添加小助手
加入工程師交流群
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- MAX9526,pdf datasheet (Low-Pow
- MAX1180 pdf datasheet (Low-Pow
- MAX1181 pdf datasheet (Low-Pow
- MAX1182 pdf datasheet (Low-Pow
- MAX1184 pdf datasheet (Low-Pow
- MAX1185 pdf datasheet (Low-Pow
- MAX1190 pdf datasheet (Low-Pow
- MAX1195 pdf datasheet (Low-Pow
- MAX1196 pdf datasheet (Low-Pow
- MAX1197 pdf datasheet (Low-Pow
- MAX2141 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC7311 pdf datasheet (Low-Pow
- MAX4298/MAX4299:適用于嚴苛環境的音頻系統IC 1.3k次閱讀
- MAX13050/MAX13052/MAX13053/MAX13054:工業級高速CAN收發器的卓越之選 92次閱讀
- Cu/low-k互連結構中的電遷移問題 2.1k次閱讀
- 低代碼(Low-Code)是什么?低代碼的特點有哪些? 5.7k次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 3.8k次閱讀
- 分享一個快速閱讀datasheet的方法 4k次閱讀
- SLVS是什么 SLVS走線對信號完整性的影響 3k次閱讀
- POW挖空塊的原理及解決辦法 1.5k次閱讀
- 如何閱讀Datasheet,是作為電子工程師的必備技能! 8.8k次閱讀
- PowerInt SID1183K單路1700V IGBT和MOSFET驅動方案 6.7k次閱讀
- AD9如何簡單快速的制作出原理圖符號 8.1k次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.7w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5.7k次閱讀
- MAX8873,MAX8874低壓差、120mA線性穩壓器數據資料 1.5k次閱讀
- MAX5970應用電路 3.4k次閱讀
下載排行
本周
- 12EDL05x06xx系列 600V半橋門驅動器帶集成自舉二極管(BSD)手冊
- 0.69 MB | 1次下載 | 免費
- 2AT817晶體管光耦系列
- 1.86 MB | 次下載 | 免費
- 3國產千兆網口芯片PT153S中文資料
- 1.35 MB | 次下載 | 免費
- 4FP7135V060-G1/FP7125替代物料pin to pin
- 495.40 KB | 次下載 | 免費
- 5PAW3311DB光學鼠標導航傳感器數據手冊
- 3.20 MB | 次下載 | 2 積分
- 6SIMATIC PCS 7 安裝步驟說明書
- 1.33 MB | 次下載 | 5 積分
- 7PCS7操作員站體系結構說明書
- 1.69 MB | 次下載 | 5 積分
- 8超級電容器產品目錄資料
- 4.50 MB | 次下載 | 免費
本月
- 1美的電磁爐電路原理圖資料
- 4.39 MB | 16次下載 | 10 積分
- 2SW6238V ACCC 三 PD 四口多協議移動電源 SOC規格書
- 0.59 MB | 5次下載 | 1 積分
- 3反激式開關電源設計解析
- 0.89 MB | 4次下載 | 5 積分
- 4IP6742_datasheet_100V8A 同步 BUCK 控制器
- 2.16 MB | 3次下載 | 免費
- 5IP5365支持3路 Type-C、UFCS、PD3.0等全部快充協議的移動電源SOC規格書
- 3.38 MB | 1次下載 | 1 積分
- 6簡易光伏控制器原理圖資料
- 0.07 MB | 1次下載 | 5 積分
- 72EDL05x06xx系列 600V半橋門驅動器帶集成自舉二極管(BSD)手冊
- 0.69 MB | 1次下載 | 免費
- 8CDx4HC74 具有清零和預設功能的雙路D類正邊沿觸發的觸發器數據表
- 1.45 MB | 次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935137次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420064次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233094次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191448次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183360次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81605次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73829次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65991次下載 | 10 積分
電子發燒友App





創作
發文章
發帖
提問
發資料
發視頻
上傳資料賺積分
評論