從理論和應用兩方面分析了三角法激光測量系統的誤差,得出：定點標定和插值可以消除
光學放大率隨測量點位置變化的影響；雙光路方案或標準點校準方法可以消除光線路徑隨環境溫度、濕度變化而引入的誤差；提高激光束質量和采用峰值求光斑中心的方法，可以消除激光束強度分布、物體表面粗糙度、CCD 傳感器、信號處理電路等引入的誤差。
關鍵詞：激光測量系統; 三角法測量; 數據處理; 測量誤差
Abstract: The error of triangular laser measuring system is analyzed in theory and applications, thus some conclusions have been obtained. These conclusions are: 1. Fixed-point scaling and interpolation can eliminate the influence of optical magnification ratio varying with position variation of measuring points is obtained, 2. Double light path scheme or calibration at standard points can eliminate the errors introduced by light-ray path varying with ambient temperature and humidity. 3. Eliminating the errors introduced by intensity distribution of laser beam, roughness on object surface, CCD sensor and signal processing circuit, etc through improving laser beam quality and looking for spot center with peak.
Key words: Laser measuring system ; Triangulation; Data processing; Measuring error