The ADRV9002NP/W1/PCBZ (low band, 30MHz – 3GHz) and ADRV9002NP/W2/PCBZ (high band, 3GHz – 6GHz) are FMC radio cards for the ADRV9002 highly integrated RF transceiver, offering dual channel transmitters and dual channel receivers, integrated synthesizers, and digital signal processing functions. The IC delivers a versatile combination of high performance and low power consumption required by battery powered radio equipment and can operate in both FDD and TDD modes. The ADRV9002 operates from 30 MHz to 6000 MHz covering the VHF, licensed and unlicensed cellular bands, and ISM bands. The IC is capable of supporting both narrowband and wideband standards up to 40MHz bandwidth on both receive and transmit.

While the complete chip level design package can be found on the ADI web site, information on the card and how to use it, the design package that surrounds it, and the software which can make it work can be found here.

People who follow the flow that is outlined, have a much better experience with things. However, like many things, documentation is never as complete as it should be. If you have any questions, feel free to ask.

• Gettings Started
  1. What you need to get started
  2. Quick Start Guides
     1. Linux on ZCU102
     2. Configure a pre-existing SD-Card
     3. Update the old card you received with your hardware
• Software Solutions
  1. IIO Scope
     1. ADRV9001/2 IIO Scope View
     2. ADRV9001/2 Control IIO Scope Plugin
  2. Transceiver Toolbox for MATLAB and Simulink
  3. GNU Radio
  4. Python Interfaces
  5. IIO Command Line Tools
  6. Generic language support
• Embedded Resources
  1. ADRV9001/2 Linux Device Driver
  2. ADRV9001/2 Device Driver Customization
  3. AXI-DMAC DMA Controller Linux Driver
  4. AXI ADC HDL Linux Driver
  5. AXI DAC HDL Linux Driver
  6. Customizing the devicetree on the target
  7. ADRV9001/2 No-OS System Level Design Setup
  8. Building the ZynqMP / MPSoC Linux kernel and devicetrees from source
• FPGA Resources
  1. HDL Reference Design which you must use in your FPGA.
  2. AXI_ADRV9002 Interface Core
  3. ADI Reference Designs HDL User Guide
  4. HDL Targeting From MATLAB and Simulink
• Hardware Resources
  1. ADRV9002 Product page
  2. Full Datasheet and chip design package

• Help and Support
  • For Hardware technical support go to:
    • Design Support Community ADRV9001-ADRV9007
  • For Evaluation System Software support (TES GUI, ADRV9001 API driver, etc.) go to:
    • TES GUI Software Support Community ADRV9001-ADRV9007
  • For questions regarding the HDL reference design please use the
    • FPGA Reference Designs sub-community.
  • For questions regarding the the ADI Linux distribution, the Linux drivers, or the device trees for the ADRV9001/2 based platforms, please use the
    • Linux Software Drivers sub-community.
  • For questions regarding the no-OS drivers for ADRV9001/2, please use the
    • Microcontroller and No-OS Driver sub-community.
  • Additional Documentation about SDR Signal Chains - The math behind the RF

Binaries:

• IIO-Scope
• ADRV9002_ZCU102_SDCARD_BOOT_FILES_JULY17.zip
• adrv9002_2019_r2_prerelease.zip

Source code have been posted on following branches on github, or has been already merged into master:

• https://github.com/analogdevicesinc/linux/tree/master/drivers/iio/adc/navassa
• https://github.com/analogdevicesinc/hdl/tree/adrv9001_zcu102/projects/adrv9001
• https://github.com/analogdevicesinc/iio-oscilloscope/blob/master/plugins/adrv9002.c
• https://github.com/analogdevicesinc/pyadi-iio/blob/master/examples/adrv9002_example.py

• ADRV9002: Narrow to Wide Band Integrated RF Transceiver

• Four Quick Steps to Production: Using Model-Based Design for Software-Defined Radio
  • Part 1—the Analog Devices/Xilinx SDR Rapid Prototyping Platform: Its Capabilities, Benefits, and Tools
  • Part 2—Mode S Detection and Decoding Using MATLAB and Simulink
  • Part 3—Mode S Signals Decoding Algorithm Validation Using Hardware in the Loop
  • Part 4 - Rapid Prototyping Using the Zynq SDR Kit and Simulink Code Generation Workflow

• Modelling and Simulating Analog Devices’ RF Transceivers with MATLAB and SimRF
• Getting Started with Software-Defined Radio using MATLAB and Simulink